Electrical Safety 101

electrical safety 101

Electrical Safety 101

You use electricity to power your house, but do you understand electrical safety? Thousands of home electrical fires occur each year, and with over 180 instances involving electrocution or electricity-related mishaps. As follows, home electrical safety is much too crucial to overlook. Today on McQuillan Bros, our Twin Cities electricians our Electrical Safety 101 Guide.

Electrical Safety 101: What You Need to Know

Tons of electrical fires are caused by faulty or broken wiring and related electrical equipment, followed by lights, light fixtures, cables, plugs, transformers, and other power supplies. When inspecting your house for potential fire concerns, always check with an expert. Below, our Minneapolis electrical company Electrical Safety 101.

electrical safety 101 Tips for Electrical Safety

Many electrical fires may be avoided by following a few basic electricity safety guidelines. The following are household electrical safety guidelines that every homeowner should be aware of and adhere to. If you have any doubts regarding the safety of an electrical outlet or device, always contact an electrician near me.

1. Verify that all of your fixtures and appliances are utilizing the right wattage

Using the appropriate bulbs can help you avoid electrical difficulties, so make sure you’re using the correct wattage in all of your lights, fixtures, and appliances. If the wattage of a light fixture is not specified, use 60-watt bulbs or less. Our Saint Paul Electricians recommend choosing 25-watt bulbs for unlabeled ceiling fittings.

LED lights use less energy and lessen the danger of fixtures overheating.

2. Keep an eye out for overloaded outlets

Electrical difficulties are frequently caused by overloading an electrical socket. As follows, check that all outlets are cool to the touch, have protective faceplates, and are in good operating condition.

3. Replace or repair broken electrical wires

Damaged power cables provide a severe domestic electrical safety danger, as they can cause fires as well as electrocution. All power and extension cables should be examined for fraying and cracking on a regular basis and repaired or replaced as needed. Power wires should not be fastened or run beneath carpets or furniture.

If you frequently use extension cords, it’s possible that you don’t have enough outlets to meet your demands. Install extra outlets in areas where you frequently use extension cords by a certified electrician who understands electrical safety standards.

4. Unplug any unneeded appliances

When an appliance is not in use, unplug it. This is one of the simplest electrical safety advice, but it is also one of the most often forgotten.

5. Keep electrical equipment and outlets away from water to avoid electrocution

Water and electricity do not get along. To adhere to electrical safety regulations, keep electrical equipment dry and free from water. This prevents appliance damage and can safeguard against bodily harm and electrocution. It is critical to have dry hands while working with electrical items.

6. Be cautious with heaters and water heaters to avoid accidents

Portable heaters and built-in furnaces should be maintained away from combustible materials. Keep combustibles away from heating units for furnace safety. Our friends at Tureks Plumbing, Water heater replacement Fox Valley WI, explains that portable heaters should never be used next to draperies, and they should always be put on a sturdy surface to avoid tipping.

Contact McQuillan Bros Today

Since 1883, McQuillan Brothers has treated every home as if it were our mother’s or grandmother’s. We take pleasure in our old-school professionalism and honest, dependable electrical solutions. Contact the McQuillan Brothers now for the best household electrical services in St. Paul and Minnesota.

electrical service twin cities


We Can't Wait To Serve You!

Complete the form below and one of our team members will give you a call to help get you scheduled. If you have an urgent need please call us at
(651) 292-0124

"*" indicates required fields


Signs Your Electrical Panel Needs an Upgrade

Signs your electrical panel needs an upgrade

Signs Your Electrical Panel Needs an Upgrade

One of the most important parts of your home’s electrical system is the electrical panel. Electricity is distributed throughout your home via circuits in the panel, including light fixtures, outlets, and other electrical appliances. The electrical capacity of your house is determined by the number of circuits and their size. If you’re having issues with your electrical system, this may be one of the signs our electrical panel needs an upgrade. Read the article below to learn what the best electricians in St Paul have to say.

Determining How Much Electricity Your Home Uses

Signs your electrical panel needs an upgrade The process of upgrading your home begins with figuring out how much electricity your house uses. What is your current electrical capacity? An amp measures the rate at which electricity flows through your home like water. Fewer than a few decades ago, the typical American home required no more than 60 amps of electricity to run. Larger homes that use a lot of electricity require 150 to 200 amps, with the average home requiring 100 amps. Updates to your home’s panel give you the ability to process and distribute more power more effectively and efficiently throughout your home. Your Minneapolis electrical panel upgrade options are as follows:
  • Expanding your home’s electrical panel to take advantage of additional utility power
  • Install a new circuit breaker and a new meter to handle the increased load.
  • Repair or replace worn-out or damaged components.
  • Increase the number of circuits in your house so you can add more outlets.
  • To avoid electrical hazards, swap out any circuits that are malfunctioning.
  • Increase electrical safety by upgrading circuits to meet current requirements

Electrical Problems in Your Home: Telltale Signs

Any of these warning signs should raise a red flag. If you notice any of these problems in your home, contact an electrician to inspect your electrical system to see if it’s time for an upgrade to your electrical panel.
  1. Shocks from electrical currents. Slight shocks and tingling are signs that the wiring is faulty or was installed incorrectly. You run the risk of ‘electrical leakage’ if this is the case when you use the switch or outlet.
  2. Burnt smell. Occasionally, a spark will occur; however, large or frequent sparks indicate deteriorated wiring or an issue with the circuitry. Also, keep an eye out for outlets that are warm or discolored. If the problem persists, call a licensed electrician to inspect the wiring or troubleshoot the overloaded circuit.
  3. When you use other appliances, the lights dim. Your electrical system isn’t ready to handle your current electrical demands, as evidenced by this symptom. In order to meet the electrical demand, an overloaded circuit diverts electricity from other parts of your house to the appliances.
  4. Frequently tripping breakers. Trips occur when circuit breakers are either overloaded or old. Older panels may make a crackling sound. This is a sure sign that your electrical panel needs to be upgraded.
  5. Use of extension cords and power strips. Extension cords and power strips are probably one of the most common signs of home energy inefficiency. You can add circuits and outlets all over your house by upgrading your panel, which reduces the risk of fire from extension cords and power strips.

Many Benefits of a New Electrical Panel In Your Home

Overloaded circuits and other electrical hazards will be less of a threat to your house with this upgrade. Electrical fires can be reduced with a new panel. Adding something new and beneficial to the equation. New electrical panels increase the resale value of your house, allow you to add more appliances, and protect expensive electronic equipment. Reduced prices. It costs money to upgrade, but in the long run it will save you money. Because of this, having a more reliable electrical system often results in lower insurance premiums. If your home is more energy efficient, you’ll use less electricity and have lower monthly electric bills as a result.

Process of Changing Electrical Panels

Our Twin Cities electricians explain that the process of upgrading an electrical panel is complex and necessitates the use of a wide range of specialized skills and close collaboration between the electrician and the electric utility and/or service provider. Depending on the update’s complexity, these tasks could take anywhere from eight to ten hours to complete. A typical electrical panel upgrade involves the following steps:
  1. The size of the new panel and the number of circuits to be added will be decided by your electrician.
  2. He or she will work with the utility company to coordinate the project and will secure any necessary permits.
  3. It’s possible that the utility company will cut off your home’s electricity supply when this happens.
  4. Your panel will be replaced or updated, and any new circuits will have wiring installed by the electrician.
  5. In most cases, a state electrical or utility inspector is required to check out a brand-new panel.
  6. Your electrical service will be restored by the utility company.
  7. An electrical panel update involves a lot of work, so make sure you hire someone who is both qualified and licensed to do it.

Contact a Local Electrician

An electrician can examine your system and determine whether or not it’s time to upgrade your home’s electrical panel. If you’re thinking about adding appliances or rooms to your house, think about the electrical load and how much room you’ll need to expand. Consider the long-term benefits of upgrading your electrical panel before you make a decision. Know your upgrade and update options. Know the danger signs. And when the time comes to act, enlist the help of McQuillan Brothers. home service coupons


We Can't Wait To Serve You!

Complete the form below and one of our team members will give you a call to help get you scheduled. If you have an urgent need please call us at
(651) 292-0124

"*" indicates required fields